- T-2 Series 2 x 2-inch 12-Gauge Steel Uprights
- 1-inch holes spaced 2-inches on the center
- Included: (4) heavy-duty steel uprights
- Included: (2) Pin and Pipe Safeties
- Included: (2) Weight Plate Horns
- Included: (2) J-Hooks with UHMW plastic
- Included: 1.25-inch Single Pull-Up Bar
- Included: Assembly Hardware
- Overall Height: 83-in.
- Max Pull-Up Bar Height: 81-in.
- Overall Footprint: 57-in x 50-in.
- No. of Holes: 28
- Product Weight: 140 lb.
- Overall Height: 71-in.
- Max Pull Up Bar Height: 69-in.
- Overall Footprint: 50-in x 50-in.
- No. of Holes: 25
- Product Weight: 133 lb.
- Inside Width: 42-in.
- Outside Width: 46-in.
- Inside Depth: 26-in.
- Outside Depth: 30-in.
- Weight Plate Horns: 1.5-in x 6-in.
- Upright Dimensions: 2-in x 2-in.
- Hole Spacing: 2-in on the center
- Finish: Powder-Coated Black
- Material: 12-Gauge Steel
- Rackable Capacity: 850 lb.
- Whole Rack Capacity: 2,200 lb.
This equipment must be used with care by capable and competent individuals under supervision, if necessary. The use of any equipment, including this one, involves the potential risk of injury. You accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN USE OF THE EQUIPMENT.